• TYPE 417 THREE QUARTER SLEEVE FROCK SHIRT

  The Frock Shirt is a combination of a three-pocket work shirt and a tailored frock coat.

• 
• 
• 
• 
• 

• TYPE 457 FROCK SHIRT

  The Frock Shirt is a combination of a three-pocket work shirt and a tailored frock coat.

• 
• 
• 
• 
• 

• TYPE 401 PLEAT POCKET SHIRT

  The Pleat Pocket Shirt is cut with a large front panel pleated into the yoke to form a large hand-warmer pocket.

• 
• 
• 

• TYPE 402 TWO BIRDS SHIRT

  The Two Birds Shirt creates two pockets with one line of pocket stitching.

• 
• 
• 

• TYPE 467 BOUND EDGE FLIPPED COLLAR SHIRT

  The Bound Edge Flipped Collar Shirt was and experimental tangent on the way to developing the 468 Flipped Collar Shirt. The entire edge of the shirt, including the entire collar, is bound in a continuous sweep of ecru cotton bias binding.

• 
• 
• 
• 
• 

• TYPE 465 ARGYLE CHEST POCKET SHIRT

  The Argyle Chest Pocket Shirt is based on the Millwheel Shirt, with a diagonally angled square chest pocket forming an argyle pattern at the top of the left front panel.

• 
• 
• 
• 
• 
• 
• 
• 
• 

• TYPE 469 SHORT SLEEVE FLIPPED COLLAR SHIRT

  The collar panel of the Short Sleeve Flipped Collar Shirt, once cut, is flipped upside down and the long side, not the short side, is sewn into the neck of the shirt.

• 
• 
• 
• 
• 

• WORKING LULU SHIRT

  Mixed Italian cotton dogtooth fabrics, lighter weight body and slightly heavier front bib and collar.  

• 

• WORKING LONG SLEEVE STICKER TSHIRT

  Pigment dyed heavyweight tee in organic cotton, with washable heat-pressed ’sticker’ Working branding at the chest.

• 
• 
• 
• 

• WORKING TRAP SHIRT

  Named for the trapezoidal shoulder yokes, split off like oxbow lakes from the sides of a formal tailored yoke.  

• 
• 
• 

• WORKING DROP SHIRT

  The Drop Shirt wears as an unstructured soft jacket, or a generous, thick and soft over shirt.

• 

• TYPE 471 PLASTRON SHIRT

  A plastron is a chest covering which sits over a lower layer. The same term is used to describe a fencer's chest pad, an armoured breastplate, and a tortoise's belly.

• 
• 
• 
• 
• 

• TYPE 439 STOLE POCKET BUTTERFLY SHIRT

  The Stole Pocket Butterfly shirt has long panel pockets sewn to the fronts and caught into the shoulder seam, recalling the embroidered liturgical vestments worn by Christian priests and bishops.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

• WORKING WITH JASON JÄGEL MOONLIGHT PRINT LONG SLEEVE TSHIRT

  Screen printed and home dyed tee in organic cotton. Our friend Jason Jägel is a painter, educator, and commissioned public artist based in San Francisco.

• 

• WORKING WITH JASON JÄGEL POPS PRINT TSHIRT

  Screen printed and home dyed tee in organic cotton. Our friend Jason Jägel is a painter, educator, and commissioned public artist based in San Francisco.

• 

• WORKING FMP OVERSHIRT

  A Fancy Mesh Pocket overshirt inspired by an East German cellular cotton resort shirt vintage find.

• 
• 
• 

• WORKING STICKER TSHIRT

  Garment dyed tee in organic cotton, with washable ’sticker’ Working branding at chest.

• 

• TYPE 468 FLIPPED COLLAR SHIRT

  The collar panel of the Flipped Collar Shirt, once cut, is flipped upside down and the long side, not the short side, is sewn into the neck of the shirt.

• 
• 
• 
• 

• TYPE 490 FLOOR SHIRT

  The Floor shirt is an edited interpretation of a factory overshirt, with large hand pockets and wide sleeves. The stitching at the shoulders appears to make a traditional seamed split yoke, but in fact it shows how the front and back panels overlap, forming a double thickness at the shoulders without any additional seams.

• 
• 
• 
• 

• TYPE 419 DOUBLE BREASTED PULLOVER HOODIE

  The Double Breasted Pullover Hoodie is a cut-down version of the 499 Dress Shirt, with a large hood cut from the fabric saved from removing the longer shirt tail.

• 
• 

• TYPE 463 ARGYLE HAND POCKET SHIRT

  The Argyle Hand Pocket Shirt is based on the Millwheel Shirt, with diagonally angled square hand-warmer pockets forming an argyle pattern at the bottoms of the front panels.

• 
• 
• 
• 
• 
• 

• TYPE 464 WEBBING FLY SHIRT

  The three body panels for the Webbing Fly Shirt are assembled, with the sleeves, and then bias bound all round in one pass, starting and ending underneath the collar, which is added at the end.

• 
• 

• TYPE 422 SQUARE TAIL SHIRT

  The Square Tail Shirt is a straight cut version of the original Tail Shirt, with a single chest pocket shaped after the shirt of an early Tender customer and friend, who cut a chest pocket out of the fabric of the original side pockets.

• 
• 
• 
• 

• WORKING SHORT SLEEVE TRAP SHIRT

  Named for the trapezoidal shoulder yokes, split off like oxbow lakes from the sides of a formal tailored yoke.  

• 

• WEAVER'S STOCK TYPE WS430 BUTTERFLY SHIRT

  The Weaver's Stock Butterfly Shirt is a tailored adaptation of the mainline Type 430 Butterfly Shirt, and is single-needle sewn with french seams.

• 
• 
• 

• WEAVER'S STOCK TYPE WS432 SHORT SLEEVE BUTTERFLY SHIRT

  The Weaver's Stock Short Sleeve Butterfly Shirt is a tailored adaptation of the mainline Type 430 Butterfly Shirt, and is single-needle sewn with french seams.

• 
• 
• 

• TYPE 434 BUGGY BACK SHIRT

  The Buggy Back Shirt takes its unusual shape and name from a traditional British tailoring technique for lining casual sports jackets. Rather than fully lining the jacket, the fronts are lined but the back is ‘buggy lined’ with triangles of lining fabric set into the shoulder seams, overlapping at the centre.

• 
• 

• TYPE 435 SHORT SLEEVE BUGGY BACK SHIRT

  The Short Sleeve Buggy Back Shirt takes its unusual shape and name from a traditional British tailoring technique for lining casual sports jackets. Rather than fully lining the jacket, the fronts are lined but the back is ‘buggy lined’ with triangles of lining fabric set into the shoulder seams, overlapping at the centre.

• 

• TYPE 416 SHORT SLEEVE THREE POCKET SQUARE TAIL SHIRT

  The Short Sleeve Three Pocket Square Tail Shirt has large hand pockets sewn into the side seams and a third left chest pocket.

• 

• TYPE 478 SQUARE TAIL YOKE POCKET SHIRT

  The Square Tail Yoke Pocket Shirt is constructed with bias-cut yokes running from a seam at the back of the neck over the shoulders, and down to the lower chest.

• 
• 

• TYPE 479 SHORT SLEEVE SQUARE TAIL YOKE POCKET SHIRT

  The Short Sleeve Square Tail Yoke Pocket Shirt is constructed with bias-cut yokes running from a seam at the back of the neck over the shoulders, and down to the lower chest.

• 
• 

• TYPE 497 OPEN SHOULDER FLOOR SHIRT

  Combining the shape and construction of the Floor Shirt with the shoulders of the Driver's Jacket, the Open Shoulder Floor Shirt is constructed with elongated front and back panels which overlap, forming a double thickness open yoke at the shoulders .

• 

• TYPE 498 SHORT SLEEVE OPEN SHOULDER FLOOR SHIRT

  Combining the shape and construction of the Floor Shirt with the shoulders of the Driver's Jacket, the Short Sleeve Open Shoulder Floor Shirt is constructed with elongated front and back panels which overlap, forming a double thickness open yoke at the shoulders .

• 

• TYPE 499 DOUBLE BREASTED PULLOVER DRESS SHIRT

  The Double Breasted Pullover Dress Shirt is adapted from the type 413 shirt, cut extra long with deep side splits, to be worn as a dress or long shirt.

• 

• TYPE 462 MILLWHEEL SHIRT

  The Millwheel Shirt is formed around the idea of rotational symmetry. The front chest pocket is tucked into the outward-facing button placket and the back pleat is taken out in one direction only.  

• 
• 
• 
• 

• TYPE 413 DOUBLE BREASTED PULLOVER SHIRT

  The Double Breasted Pullover Shirt is cut with an extra wide front placket, overlapping with double buttons.The back of the shirt has a very large inverted pleat sewn into the centre.

• 
• 

• TYPE 414 HOODED DOUBLE BREASTED PULLOVER SHIRT

  The Hooded Double Breasted Pullover Shirt is cut with an extra wide front placket, overlapping with double buttons. The back of the shirt has a very large inverted pleat sewn into the centre, and a fully lined hood replaces the collar.

• 

• TYPE 446 WIDE FACE SHIRT

  The Wide Face Shirt is cut with extra deep wide facings, sewn down halfway across the front panels.

• 

• TYPE 447 SHORT SLEEVE WIDE FACE SHIRT

  The Short Sleeve Wide Face Shirt is cut with extra wide front facings, sewn down halfway across the front panels.

• 

• TYPE 441 COMPASS POCKET SHIRT

  The Compass Pocket Shirt has symmetrical semicircular front and back tails, with large concentric curved pockets (drawn with a compass) all the way around each front tail.

• 
• 

• TYPE 427 PERISCOPE POCKET SHIRT

  The Periscope Pocket Tail Shirt is made with pockets which echo the large chest pockets of generic work shirts, accessed from the middle at the top. Periscope pockets have an additional opening at the lower outside, so they can also be used as hand-warmers.

• 
• 
• 
• 

• TYPE 461 BASTE POCKET SHIRT

  The Baste Pocket Shirt is named after a tailor's baste- the first rough fitting for a bespoke garment. The shirt is cut with long straight front panels, which are folded up to form a pocket, and back at the fronts to form a cut-away, like the basted front of a bespoke waistcoat.

• 
• 
• 
• 
• 

• WEAVER'S STOCK TYPE WS420 WELSH FLANNEL TAIL SHIRT

  Weaver’s Stock shirts are made using deadstock fabrics from British weaving mills, sewn in a small factory in the Midlands. These shirts are overlocked and topstitched, like utilitarian workwear, and are cut large, with scooped tails.

• 
• 
• 
• 

• TYPE 430 LONG SLEEVE BUTTERFLY SHIRT

  Does the flap of a butterfly's wings in Brazil set off a tornado in Texas? The Butterfly Shirt came about from working through the changes needed to be made for the Type 420 Tail Shirt to have no side seams.

• 
• 
• 

• TYPE 493 SHORT SLEEVE BENCH SHIRT

  The short sleeved Bench shirt is an edited interpretation of a draught-maker’s shirt, with a single breast pocket and open short sleeves.

• 
• 
• 
• 

• TYPE 432 SHORT SLEEVE BUTTERFLY SHIRT

  Does the flap of a butterfly's wings in Brazil set off a tornado in Texas? The Butterfly Shirt came about from working through the changes needed to be made for the Type 420 Tail Shirt to have no side seams.

• 

• TYPE 420 LONG SLEEVE TAIL SHIRT

  The Tail Shirt was the first Tender button-down shirt, with deep scooped hems and large patch pockets sewn into the side seams.

• 

• TYPE 443 SHORT SLEEVE COMPASS POCKET SHIRT

  The Short Sleeve Compass Pocket Shirt has symmetrical semicircular front and back tails, with large concentric curved pockets (drawn with a compass) all the way around each front tail.

• 
• 

• WEAVER'S STOCK TYPE WS420 FRENCH SEAMED TAIL SHIRT

  Weaver’s Stock shirts are made using deadstock fabrics from British weaving mills, sewn in a small factory in the Midlands. These shirts are single-needle sewn with french seams, and are cut with scooped tails.

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

• TYPE 492 LONG SLEEVE BENCH SHIRT

  The long sleeved Bench shirt is an edited interpretation of a draught-maker’s shirt, with a single breast pocket and pleated cuffs.

• 
•